ZT-Piston Ø38.47 1-Ring - for Simson S51, KR51/2 Swallow, SR50
ZT-Tuning
ZT-Piston Ø38.47 1-Ring - for Simson S51, KR51/2 Swallow, SR50
ZT-Tuning
€49.19*
Product & manufacturer numbers
- Condition : Neu
- Product number: 10066967
- GTIN / EAN: 4052309266010
- Standard despatch
- via DHL
- Question about the article?
- Click here and we'll help you
Product information "ZT-Piston Ø38.47 1-Ring - for Simson S51, KR51/2 Swallow, SR50"
ZT-Piston Ø38.47 1-Ring - for Simson S51, KR51/2 Swallow, SR50
- The respective piston size and the inscription "ZT-Tuning" are engraved in the piston
- Compression dimension identical to Simson S51, so NOTHING needs to be changed on the cylinder
- perfectly adapted to the conditions in the air-cooled Simson engine
- Steel ring with coating
- ground contact surface for thrust washers
- weight-optimized piston pin
- Manufactured by one of the most renowned piston manufacturers in Europe
- Total weight approx. 80g
- Dimensions in mm (see picture):
A: 38.47
B: 31
C: 50
D: center over inlet
E: 34.5
F: 30
G: 15.2
Advantages:
- Piston geometry adapted for high load
- ideally suited for tuning cylinders
- also suitable for standard cylinders
- lighter than standard pistons
- surfaces for thrust washers processed
- for use of original thrust washers (1mm)
- original compression dimension
- no need to turn the cylinder
- 34mm wide inlet sleeve, therefore also suitable for MS 50 cylinders
- extremely durable and high-quality aluminum alloy
- lower friction
- lower wear
- piston ring gap in the center over the inlet
- The respective piston size and the inscription "ZT-Tuning" are engraved in the piston
- Compression dimension identical to Simson S51, so NOTHING needs to be changed on the cylinder
- perfectly adapted to the conditions in the air-cooled Simson engine
- Steel ring with coating
- ground contact surface for thrust washers
- weight-optimized piston pin
- Manufactured by one of the most renowned piston manufacturers in Europe
- Total weight approx. 80g
- Dimensions in mm (see picture):
A: 38.47
B: 31
C: 50
D: center over inlet
E: 34.5
F: 30
G: 15.2
Advantages:
- Piston geometry adapted for high load
- ideally suited for tuning cylinders
- also suitable for standard cylinders
- lighter than standard pistons
- surfaces for thrust washers processed
- for use of original thrust washers (1mm)
- original compression dimension
- no need to turn the cylinder
- 34mm wide inlet sleeve, therefore also suitable for MS 50 cylinders
- extremely durable and high-quality aluminum alloy
- lower friction
- lower wear
- piston ring gap in the center over the inlet
Product details
Important features & properties
- Anzahl Kolbenringe
- 1
- Ausführung
- Tuning
- Baugruppe
- Motor & -teile
- Durchmesser in mm
- 38,47
- Flächen für Anlaufscheiben
- bearbeitet
- Hubraum in ccm
- 50
- Passend für Fahrzeughersteller
- Simson
- Passend für Fahrzeugtyp
- KR51/2 Schwalbe , S51 , S53 , SR50
1 Rating
Benjamin
Qualität
Empfehlung
Preis- / Leistung
Passgenauigkeit
Erwartungen erfüllt
Super Produkt!
Hab mir selbst einen Tuning Zylinder bearbeitet und den Kolben benutzt. Ist ein Super Teil und hat bis jetzt auch nicht geklemmt . Kann ich nur weiter empfehlen!
- Mein Fahrzeug
- S51
Is this review helpful?
0
0
Exploded views "ZT-Piston Ø38.47 1-Ring - for Simson S51, KR51/2 Swallow, SR50"
Here you will find all the exploded views in which this product appears.
| Manufacturer | Model range | Modell | Drawing | Position | Open drawing |
|---|---|---|---|---|---|
Simson
|
Duo 4/2 | 0 | Open drawing | ||
Simson
|
MS50 | 0 | Open drawing | ||
Simson
|
SD 25/50 | 0 | Open drawing | ||
Simson
|
S51 | 0 | Open drawing | ||
Simson
|
S53 | 0 | Open drawing | ||
Simson
|
S53 | 0 | Open drawing | ||
Simson
|
KR51/2 Schwalbe | 0 | Open drawing | ||
Simson
|
SR50 | 0 | Open drawing |
Alternative Produkte
Currently not available
