LT 2-Ring Piston LTP-A Ø37.97 - for Simson S51, KR51/2 Swallow, SR50
LangTuning
LT 2-Ring Piston LTP-A Ø37.97 - for Simson S51, KR51/2 Swallow, SR50
LangTuning
Currently not available
Notify me as soon as the product is available again.
Product & manufacturer numbers
- Product number: 10071734
- GTIN / EAN: 4052309319556
- Standard despatch
- via DHL
- Question about the article?
- Click here and we'll help you
Product information "LT 2-Ring Piston LTP-A Ø37.97 - for Simson S51, KR51/2 Swallow, SR50"
LangTuning LTP-A Piston 37.97mm
The LTP-A pistons are completely newly designed and optimized in all aspects for Simson cylinders.
- Extremely light
- the lightest pistons for Simson on the market
- Extremely durable: the inner geometry of the piston and the alloy ensure stability
- Very wide piston skirt at the inlet: Good piston guidance even with very wide inlet channels
- With piston window: Thanks to the window, better cooling of the piston base and additional filling of the transfer ports
- Clamp-free: Very precise piston geometry specially tuned to the thermal expansion for air-cooled cylinders
- Rattle-free: High-quality 1 mm steel rings in precisely manufactured piston ring grooves
- LTP-A 2-ring piston for standard and sport cylinders
- LTP-A 1-ring piston for tuning and racing cylinders
Geometry
- A Diameter: 37.97mm
- B Length: 50 mm (like original Simson S51 and Co.)
- C Compression dimension: 31 mm (like original Simson S51 and Co.)
- D Ring gap: 2 mm
- E Ring gap: 2 mm
- F Distance contact surfaces: 15.5 mm (suitable for 1 mm contact washers)
- G Piston pin diameter: 12 mm
- H Width piston skirt inlet: 33.5 mm
- I Width piston skirt outlet: 28.5 mm
Piston weight (basic dimension): only 55 g
Piston weight including pin, rings, clips (basic dimension): only 70 g
Scope of delivery
- LTP-A piston
- Piston pin
- Piston rings
- Piston clips
Note:
LT KnowHow
Langtuning designed the LTP-A pistons from scratch. Usually, only the outer geometry such as length, diameter, etc. is transmitted to the manufacturer in the Simson market and the manufacturer produces a piston shape. These forms usually have a high material thickness, making the piston correspondingly heavy.
Langtuning takes new paths with the construction of the LTP-A pistons.
This is of course much more complex and requires corresponding experience.
But as a result, the piston weight is on average 10% lower than usual pistons in the quality price segment and around 20% lower than cheap standard pistons.
At the same time, the pistons could be reinforced depending on the size by a corresponding strut design, so that they are not only lighter, but also more stable.
The LTP-A pistons are optimized for slot-controlled Simson cylinders. Thanks to an extra wide inlet skirt, even very wide inlet channels for tuning cylinders are possible. At the same time, the LTP-A pistons are also suitable for standard cylinders and can be used without any problems. The piston windows are positioned in such a way that there is no short circuit with the inlet or side outlets.
The LTP-A pistons are completely newly designed and optimized in all aspects for Simson cylinders.
- Extremely light
- the lightest pistons for Simson on the market
- Extremely durable: the inner geometry of the piston and the alloy ensure stability
- Very wide piston skirt at the inlet: Good piston guidance even with very wide inlet channels
- With piston window: Thanks to the window, better cooling of the piston base and additional filling of the transfer ports
- Clamp-free: Very precise piston geometry specially tuned to the thermal expansion for air-cooled cylinders
- Rattle-free: High-quality 1 mm steel rings in precisely manufactured piston ring grooves
- LTP-A 2-ring piston for standard and sport cylinders
- LTP-A 1-ring piston for tuning and racing cylinders
Geometry
- A Diameter: 37.97mm
- B Length: 50 mm (like original Simson S51 and Co.)
- C Compression dimension: 31 mm (like original Simson S51 and Co.)
- D Ring gap: 2 mm
- E Ring gap: 2 mm
- F Distance contact surfaces: 15.5 mm (suitable for 1 mm contact washers)
- G Piston pin diameter: 12 mm
- H Width piston skirt inlet: 33.5 mm
- I Width piston skirt outlet: 28.5 mm
Piston weight (basic dimension): only 55 g
Piston weight including pin, rings, clips (basic dimension): only 70 g
Scope of delivery
- LTP-A piston
- Piston pin
- Piston rings
- Piston clips
Note:
LT KnowHow
Langtuning designed the LTP-A pistons from scratch. Usually, only the outer geometry such as length, diameter, etc. is transmitted to the manufacturer in the Simson market and the manufacturer produces a piston shape. These forms usually have a high material thickness, making the piston correspondingly heavy.
Langtuning takes new paths with the construction of the LTP-A pistons.
This is of course much more complex and requires corresponding experience.
But as a result, the piston weight is on average 10% lower than usual pistons in the quality price segment and around 20% lower than cheap standard pistons.
At the same time, the pistons could be reinforced depending on the size by a corresponding strut design, so that they are not only lighter, but also more stable.
The LTP-A pistons are optimized for slot-controlled Simson cylinders. Thanks to an extra wide inlet skirt, even very wide inlet channels for tuning cylinders are possible. At the same time, the LTP-A pistons are also suitable for standard cylinders and can be used without any problems. The piston windows are positioned in such a way that there is no short circuit with the inlet or side outlets.
Product details
Important features & properties
- Anzahl Kolbenringe
- 2
- Ausführung
- Tuning
- Baugruppe
- Motor & -teile
- Durchmesser in mm
- 37,97
- Flächen für Anlaufscheiben
- unbearbeitet
- Hubraum in ccm
- 50
- Maß
- Grundmaß
- Passend für Fahrzeughersteller
- Simson
- Passend für Fahrzeugtyp
- KR51/2 Schwalbe , S51 , S53 , SR50
5 Ratings
Elias
Qualität
Empfehlung
Preis- / Leistung
Passgenauigkeit
Erwartungen erfüllt
Optimal für den Alltag
Der Kolben ist wie von Langtuning gewohnt sehr schön durchdacht, dünne wandstärken durch gute Verstrebungen und die für den Simsonmarkt „Innovation“ mit dem seitlichen Fenster. Das Fenster habe ich persönlich nochmal nachträglich mit einer Cuttermesser Klinge entgratet, sonst gab es nicht zu beanstanden, läuft schön. Abgesehen von dem nachgewiesenen kleinen Leistungsvorteil (siehe Youtube -> Co2 Radtechnik).
- Mein Fahrzeug
- S51
Is this review helpful?
0
0
Martin Junior
Qualität
Empfehlung
Preis- / Leistung
Passgenauigkeit
Erwartungen erfüllt
Sehr guter Kolbe
Der Kolben ist sehr gut verarbeitet und die Kolbenringe lassen sich ebenfalls sehr gut montieren. Der Kolben läuft sehr gut und macht keine Probleme. Er ist sehr empfehlenswert.
- Mein Fahrzeug
- S51
Is this review helpful?
0
0
Marcus
Qualität
Empfehlung
Preis- / Leistung
Passgenauigkeit
Erwartungen erfüllt
Bester Kolben
Echt ein klasse Kolben. Die Verarbeitung ist echt tadellos. Die Kolbenringe lassen sich gut montieren. Nur die C-Clips lassen sich etwas fummelig einsetzen. Aber dafür gibt es auch ein Spezialwerkzeug!
- Mein Fahrzeug
- S51
Is this review helpful?
0
0
Torsten
Qualität
Empfehlung
Preis- / Leistung
Passgenauigkeit
Erwartungen erfüllt
Bin absolut begeistert und werde nur noch den verwenden
Bin absolut begeistert!!! Der Kolben läuft vom ersten Tag an extrem ruhig und macht jegliche Lastwechsel sowie Vollgasfahrten problemlos mit. Man merkt nicht wirklich ne Leistungssteigerung, aber der Motor nimmt das Gas besser an.
Is this review helpful?
0
0
Rene
Qualität
Empfehlung
Preis- / Leistung
Passgenauigkeit
Erwartungen erfüllt
Kolben läuft tadellos
Der Kolben ist sauber verarbeitet und maßhaltig. Der Kolbenbolzen passt wunderbar und auch die Clips halten perfekt.
- Mein Fahrzeug
- S51
Is this review helpful?
0
0
Exploded views "LT 2-Ring Piston LTP-A Ø37.97 - for Simson S51, KR51/2 Swallow, SR50"
Here you will find all the exploded views in which this product appears.
| Manufacturer | Model range | Modell | Drawing | Position | Open drawing |
|---|---|---|---|---|---|
Simson
|
Duo 4/2 | 0 | Open drawing | ||
Simson
|
MS50 | 0 | Open drawing | ||
Simson
|
SD 25/50 | 0 | Open drawing | ||
Simson
|
S51 | 0 | Open drawing | ||
Simson
|
S53 | 0 | Open drawing | ||
Simson
|
S53 | 0 | Open drawing | ||
Simson
|
KR51/2 Schwalbe | 0 | Open drawing | ||
Simson
|
SR50 | 0 | Open drawing |
Alternative Produkte
Currently not available
LangTuning | 10071735 LT 2-Ring Piston LTP-A Ø37.98 - for Simson S51, KR51/2 Swallow, SR50
Currently not available
