BRUNOX 1-K-Filler, Fill & Adhesion Primer - 400ml

BRUNOX 1-K-Filler, Filler & Adhesion Primer - 1 Component Filler & Adhesion Primer - Ideal connection between BRUNOX epoxy Rust Stop + Primer and Topcoat - compatible with water-based, air-drying acrylic, synthetic resin & nitro combination paints. - Color shade: matte light gray - Dust dry after 20 minutes - Sandable after 2 - 4 hours - Reinforces corrosion protection - equalizes the smallest unevenness and scratches - reduces topcoat consumption - Guarantees quick coverage, even with light paints - leads to a better gloss result of the top coating - suitable for priming or undercoating of metal surfaces Rust remediation in 3 steps: 1. Remove loose rust, wipe rust dust/rust particles with a lint-free damp cloth (Alternatively wipe with a dust-binding cloth or blow off with a compressor.) Clean greasy surfaces with acetone. (No silicone remover or nitro thinner) 2. Shake BRUNOX epoxy rust converter vigorously and apply 2x at a distance of about 25cm. Check for complete drying. (Fingernail hard) No washing necessary! 3. Sand the layer dry with 400 grit sandpaper afterwards. (only remove gloss) For further treatment, sand down to converted pore rust. If necessary, fill dents and unevenness. Apply BRUNOX 1-K-Filler evenly, spray several thin layers, spray distance about 25cm. After subsequent intermediate sanding, apply the final coating directly. (Observe manufacturer specifications)