B-Stock - Set: ZT-Tuning Telescopic Fork for Disc Brake - inspected by manufacturer - paint chipping present - color: silver - without parts certificate - continuous identification: ZT-Tuning 1706 - * - ******* - based on the original Simson telescopic fork for disc brake - very good damping properties, with high riding comfort - damper completely revised inside - screwable opening at the top - spring preload adjustable via the length of the preload sleeve - bore cross-sections for rebound and compression damping adjusted - mount for Simson brake caliper (Grimeca) - travel approx. 125mm - hydraulic end stop, prevents the fork from bottoming out - total length approx. 71cm (short version) - stanchion Ø30.00 mm The following vehicles are listed in the parts certificate: - S50N, S50B, S50B1, S50B2 - S51N, S51B1-3, S51B1-4, S51B2-4, S51E, S51C - S53, S53M - S70C, S70E - S83 - MS50 Note: The telescopic fork can be easily opened from the top (in installed condition) and the preload sleeve can be removed and, if necessary, a longer or shorter sleeve can be installed to adjust the preload. Thus, each rider can adjust the telescopic fork according to their preferences depending on weight or desired stiffness. The fork is filled with very thin oil in the delivery condition to achieve a good compromise between comfort and damping. For racing use, a slightly thicker oil can be chosen and, if necessary, the preload sleeve can be chosen a bit longer. With these measures, the fork is also absolutely suitable for racing tracks. Use of the original drum brake is not possible!